Pecron

Pecron E300LFP

Pecron E300LFP: 288 Wh, LiFePO4, 600 W continuous AC.

  • Capacity 288 Wh
  • Continuous AC 600 W
  • Weight 10.6 lb
  • Chemistry LiFePO4
  • Solar input 100 W

Where to buy

Buying verdict

Who it's for

Buyers sizing backup power for a specific set of devices. Use the 288 Wh nominal battery capacity to estimate runtime for your loads.

Estimate runtime for your devices

Who should skip it

Anyone whose combined running AC loads exceed 600 W, the published continuous rating.

The comparisons below use the closest catalog model within 20% of this station's rated battery capacity. Compare with Jackery Explorer 300 Plus.

Pros

  • More continuous AC output than the Jackery Explorer 300 Plus (600 W vs. 300 W).
  • Supports up to 100 W of manufacturer-rated solar input with a compatible setup.

Cons

  • Heavier than the Jackery Explorer 300 Plus (10.6 lb vs. 8.27 lb).

Manufacturer specs

Each figure links to the page it was read from. Use the ? buttons for plain-English definitions.

Listings change. Confirm the current spec sheet before you buy. Nothing here is a safety certification or a promise that a particular appliance will run.

Manufacturer specifications for Pecron E300LFP
Spec Published figure Source
Capacity How much energy it stores — a 1,000 Wh unit runs a 100 W device about 8–9 hours after typical losses. 288 Wh pecron.com Checked
Continuous AC output The most wattage it can power at once without an overload warning. 600 W pecron.com Checked
Battery chemistry LiFePO4 pecron.com Checked
Weight How heavy the station is to lift and carry. 10.6 lb (4.8 kg) pecron.com Checked
Solar input The most solar charging wattage the station is rated to accept. 100 W max pecron.com Checked

Derived buyer metrics & UPS notes

  • Wh/lb Calculated from capacity (Wh) ÷ weight (lb). Higher means more stored energy per pound carried; hidden if either input is missing. 27.2 Wh/lb calculated from published capacity ÷ weight

Solar charging

All solar panels

Panel compatibility is unverified for this model. Check the station's voltage, current, and connector limits with the manufacturer before connecting a panel.

Runtime examples

Calculator defaults: 90% depth of discharge, 85% inverter efficiency, 95% DC efficiency. Planning estimates, not lab measurements.

Use your own loads
Estimated runtime for Pecron E300LFP under common loads
Load scenario Estimated runtime
Compact fridge (70 W running, 40% duty) 7 h 52 min
Laptop 65 W USB-C + Wi-Fi router 10 W AC 3 h 14 min
12 V compressor cooler (45 W, 40% duty) 13 h 41 min

Will Pecron E300LFP run specific appliances?

Frequently asked questions

What is the battery capacity of the Pecron E300LFP?

The manufacturer lists 288 Wh of nominal battery capacity. Usable energy depends on the load and power conversion losses.

How much continuous AC power does the Pecron E300LFP supply?

The manufacturer lists 600 W of continuous AC output.

What is the Pecron E300LFP's surge rating?

A verified surge rating is unavailable in the catalog.

What is the solar input rating of the Pecron E300LFP?

The manufacturer lists up to 100 W of solar input. Check the station's voltage, current, and connector limits when selecting panels.

Current deals for this station

All deals

No verified manufacturer promotion currently lists this station. See all deals for brand-wide offers.

Relevant use cases

More from Pecron

All Pecron models

Sources

Manufacturer pages cited in the spec table. Check dates are listed beside each figure.

How specs are collected and compared: Methodology. Spot an outdated spec or broken link? Report an error .