Anker
Anker SOLIX C800 Plus
- Capacity:768 Wh
- Continuous AC:1,200 W
- Weight:≈ 24 lb
- Chemistry:LiFePO4
Anker SOLIX F3800 Plus: 3,840 Wh, LiFePO4, 6,000 W continuous AC, 9,000 W surge.
Buyers sizing backup power for a specific set of devices. Use the 3,840 Wh nominal battery capacity to estimate runtime for your loads.
Anyone whose combined running AC loads exceed 6,000 W, the published continuous rating.
Each figure links to the page it was read from. Use the ? buttons for plain-English definitions.
Listings change. Confirm the current spec sheet before you buy. Nothing here is a safety certification or a promise that a particular appliance will run.
| Spec | Published figure | Source |
|---|---|---|
| Model code | A1790112 | ankersolix.com Checked |
| Price Current manufacturer-direct or listed US price with source link and check date. | $2,999.99 | ankersolix.com Checked |
| Capacity How much energy it stores — a 1,000 Wh unit runs a 100 W device about 8–9 hours after typical losses. | 3,840 Wh | ankersolix.com Checked |
| Continuous AC output The most wattage it can power at once without an overload warning. | 6,000 W | ankersolix.com Checked |
| Surge output A short peak for motors and compressors when they start up. | 9,000 W | ankersolix.com Checked |
| Battery chemistry | LiFePO4 | ankersolix.com Checked |
| Cycle life Full charge/discharge cycles before capacity drops to the stated remaining percentage. | 3,000 (to 80%) | ankersolix.com Checked |
| Weight How heavy the station is to lift and carry. | 136.7 lb (61.5 kg) | ankersolix.com Checked |
| Solar input The most solar charging wattage the station is rated to accept. | 3,200 W max | ankersolix.com Checked |
| Ports | AC 120 V / 240 V (6,000 W max): six NEMA 5-20R (2,400 W max per 3-port group), one NEMA TT-30R (120 V, 3,000 W max), one NEMA L14-30R (120/240 V, 6,000 W max). USB-C ×3 (100 W max each), USB-A ×2 (12 W max each), car auxiliary ×1 (12 V / 10 A, 120 W). | ankersolix.com Checked |
| UPS switchover How fast the station switches from wall power to battery during an outage (ms). Faster switchover (such as ≤20 ms or <10 ms) helps keep desktop PCs from rebooting and matters when planning CPAP backup (always verify compatibility with your device manufacturer). | 20 ms | ankersolix.com Checked |
| Idle draw Published standby power drawn when the station's inverter is switched on with no active load. | 40 W | ankersolix.com Checked |
| Expansion | Up to 6 × BP3800 expansion batteries (26.88 kWh single unit); up to 53.8 kWh with two F3800 Plus units. | ankersolix.com Checked |
| Dimensions | 27.6 × 15.3 × 15.6 in (including wheels) | ankersolix.com Checked |
Checked against published solar input limits with a +15% cold-weather Voc margin Open-circuit voltage (Voc) is measured at 25 °C (77 °F) with no load. Solar panel Voc rises in cold weather (~0.3%/°C below 25 °C), so we apply a +15% cold-weather safety margin before declaring a string safe for a station's max input voltage. and series/parallel rules Wiring panels in series adds Voc (must stay under the station's max voltage with cold-weather margin). Wiring in parallel adds current (Isc). Counts are shown only when both station limits and panel Voc/Isc are published. . Charge times assume 75% of rated solar power. Charge-time estimates apply a 75% real-world solar derating factor (midpoint of a typical 70–80% range) to account for sun angle, temperature, haze, and conversion losses. Actual harvest varies with weather and shading.
| Solar panel | Specs | Status | Series / parallel | Connector & notes | Est. 1-panel charge | Buy |
|---|---|---|---|---|---|---|
| Anker SOLIX PS400 Bifacial 400W | 400 W · 57.6 V Voc · 8.75 A Isc | Compatible | Up to 2S × 1P per port (4 max across 2 ports) | Included adapter (MC4 → XT60) | ~12.8 hrs (est.) | Anker |
| Anker SOLIX PS200 Bifacial 200W | 200 W · 57.6 V Voc · 4.35 A Isc | Compatible | Up to 2S × 3P per port (12 max across 2 ports) | Included adapter (MC4 → XT60) | ~25.6 hrs (est.) | Anker |
| Anker SOLIX PS100 Bifacial 100W | 100 W | Check with manufacturer | Check with manufacturer | Included adapter (MC4 → XT60) | — | Anker |
| Jackery SolarSaga 500 X | 500 W · 49.2 V Voc · 12.92 A Isc | Compatible (adapter) | Up to 1S × 1P per port (2 max across 2 ports) | Adapter needed (DC8020 → XT60) | ~10.2 hrs (est.) | Jackery |
| EcoFlow 400W Lightweight Portable Solar Panel | 400 W · 39.3 V Voc · 12.2 A Isc | Compatible (adapter) | Up to 3S × 1P per port (6 max across 2 ports) | Adapter needed (MC4 → XT60) | ~12.8 hrs (est.) | EcoFlow |
| BLUETTI 350W Solar Panel (PV350) | 350 W · 46.5 V Voc · 10.8 A Isc | Compatible (adapter) | Up to 3S × 1P per port (6 max across 2 ports) | Adapter needed (MC4 → XT60) | ~14.6 hrs (est.) | BLUETTI |
| Pecron PV300 300W Solar Panel | 300 W · 41.4 V Voc · 8.7 A Isc | Compatible (adapter) | Up to 3S × 1P per port (6 max across 2 ports) | Adapter needed (MC4 → XT60) | ~17.1 hrs (est.) | Pecron |
| EcoFlow NextGen 220W Bifacial Portable Solar Panel | 220 W · 21.4 V Voc · 12.2 A Isc | Compatible | Up to 6S × 1P per port (12 max across 2 ports) | Direct XT60 fit | ~23.3 hrs (est.) | EcoFlow |
| BLUETTI SP200L 200W Solar Panel | 200 W · 24.62 V Voc · 10.24 A Isc | Compatible (adapter) | Up to 5S × 1P per port (10 max across 2 ports) | Adapter needed (MC4 → XT60) | ~25.6 hrs (est.) | BLUETTI |
| Jackery SolarSaga 200W | 200 W · 23.2 V Voc · 11.76 A Isc | Compatible (adapter) | Up to 6S × 1P per port (12 max across 2 ports) | Adapter needed (DC8020 → XT60) | ~25.6 hrs (est.) | Jackery |
| Pecron PV200 200W Solar Panel | 200 W · 41.4 V Voc · 5.7 A Isc | Compatible (adapter) | Up to 3S × 2P per port (12 max across 2 ports) | Adapter needed (MC4 → XT60) | ~25.6 hrs (est.) | Pecron |
| EcoFlow NextGen 160W Portable Solar Panel | 160 W · 21.4 V Voc · 9.2 A Isc | Compatible | Up to 6S × 1P per port (12 max across 2 ports) | Direct XT60 fit | ~32 hrs (est.) | EcoFlow |
| EcoFlow 110W Portable Solar Panel | 110 W · 21.8 V Voc · 6.5 A Isc | Compatible | Up to 6S × 2P per port (24 max across 2 ports) | Included adapter (MC4 → XT60) | ~46.5 hrs (est.) | EcoFlow |
| BLUETTI SP100L 100W Solar Panel | 100 W · 24.62 V Voc · 5.13 A Isc | Compatible (adapter) | Up to 5S × 3P per port (30 max across 2 ports) | Adapter needed (MC4 → XT60) | ~51.2 hrs (est.) | BLUETTI |
| Jackery SolarSaga 100 Prime | 100 W · 22.7 V Voc · 5.53 A Isc | Compatible (adapter) | Up to 6S × 3P per port (36 max across 2 ports) | Adapter needed (Anderson → XT60) | ~51.2 hrs (est.) | Jackery |
| Pecron PV100 100W Solar Panel | 100 W · 24.5 V Voc · 5.8 A Isc | Compatible (adapter) | Up to 5S × 2P per port (20 max across 2 ports) | Adapter needed (DC5521 → XT60) | ~51.2 hrs (est.) | Pecron |
| Zignes 100W Solar Panel | 100 W · 29 V Voc · 6 A Isc | Compatible | Up to 4S × 2P per port (16 max across 2 ports) | Direct XT60 fit | ~51.2 hrs (est.) | DJI |
| Goal Zero Boulder 200 Briefcase | 200 W · 21.8 V Voc | Check with manufacturer | Check with manufacturer | Adapter needed (HPP → XT60) | — | Goal Zero |
| Jackery SolarSaga 100 Air | 100 W · 26.3 V Voc | Check with manufacturer | Check with manufacturer | Adapter needed (DC8020 → XT60) | — | Jackery |
| Goal Zero Nomad 100+ | 100 W | Check with manufacturer | Check with manufacturer | Adapter needed (DC7909 → XT60) | — | Goal Zero |
Advertiser disclosure: if you buy through this link, we may earn a commission at no extra cost to you. Full disclosure.
Calculated from sourced US station and expansion battery prices Calculated from current manufacturer-direct station price plus the minimum compatible expansion batteries needed to reach each kWh target (within the station's published max battery limit). Hidden if any price or capacity input is unavailable. . Tiers missing a sourced price hide the dollar total.
Anker SOLIX BP3800 Expansion Battery — 3,840 Wh per pack (ankersolix.com) · $1999.99 each (ankersolix.com) · Max 6 packs (up to 26,880 Wh)
| Target tier | Batteries needed | Total capacity | Est. total cost (station + packs) |
|---|---|---|---|
| ~2 kWh (2,000 Wh) | 0 packs (base station meets target) | 3,840 Wh | $2,999.99 |
| ~4 kWh (4,000 Wh) | 1 × SOLIX BP3800 Expansion Battery | 7,680 Wh | $4,999.98 |
| ~6 kWh (6,000 Wh) | 1 × SOLIX BP3800 Expansion Battery | 7,680 Wh | $4,999.98 |
Calculator defaults: 90% depth of discharge, 85% inverter efficiency, 95% DC efficiency. Planning estimates, not lab measurements.
| Load scenario | Estimated runtime |
|---|---|
| Compact fridge (70 W running, 40% duty) | 104 h 55 min |
| Laptop 65 W USB-C + Wi-Fi router 10 W AC | 43 h 6 min |
| 12 V compressor cooler (45 W, 40% duty) | 182 h 24 min |
The manufacturer lists 3,840 Wh of nominal battery capacity. Usable energy depends on the load and power conversion losses.
The manufacturer lists 6,000 W of continuous AC output.
The manufacturer lists 9,000 W of surge output for brief startup loads.
The manufacturer lists up to 3,200 W of solar input. Check the station's voltage, current, and connector limits when selecting panels.
Up to 6 × BP3800 expansion batteries (26.88 kWh single unit); up to 53.8 kWh with two F3800 Plus units.
No verified manufacturer promotion currently lists this station. See all deals for brand-wide offers.
Anker
Anker
Anker